Installing The Scanner Server Software For Windows Nt - Epson GT-10000 User Manual

7. Follow the instructions on the screen to
install EPSON Scan Server. When you see
the window on the right, make sure
is selected under Scanner
GT-10000
Selection.
Select either
Icon
scanner server start up mode. (See
"Changing the Scanner Server Start Up
Mode" on page 71 for details about the
start up mode.)
8. Click to test scanner operation.
Test
OK. Scanner available
Status if the scanner is communicating
with the scanner server. Then click
If you want to share a different network scanner with the
client computers, you can access the EPSON Scan Server
window at any time by double-clicking the EPSON Scan
Server icon in the Windows Control Panel. Then select the
scanner you want in the Scanner Selection list.
9. Follow the instructions on the screen to complete installation of additional
software you selected in the software selection window.
10. If you want to install PhotoDeluxe and TextBridge Pro, see page 33 for
instructions. When you're done installing software, restart your computer.
Installing the Scanner Server Software for
Windows NT 4.0
Before your computer can share its scanner, you must install EPSON Scan Server. At
the same time, you can install other software that came with your scanner. You can
install Presto! PageManager on up to six computers on your network. Your scanner
comes with a single-user license for PhotoDeluxe and TextBridge Pro. If you want to
install these applications on additional computers, please contact the software
manufacturer to purchase additional licenses.
or as the
Dialogbox
appears under
OK
.
Network Scanning
67