Epson GT-10000 User Manual
Automatic document feeder
Hide thumbs
Also See for GT-10000:
- User manual (133 pages) ,
- Product information manual (9 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
The optional automatic document feeder (ADF) (part number GT10000ADF)
automatically loads multi-page documents into your scanner. It is particularly useful
for optical character recognition (OCR) scanning or for creating an image database.
To use the ADF with your OCR software, you must install EPSON TWAIN Pro or
the ISIS driver that comes with the optional ADF. (See the ISIS Driver Guide that
comes with the optional ADF for instructions.)
The ADF is large and heavy. Clear a wide space around the
scanner before installing the ADF. You may need to have
someone help you unpack and lift it.
You can purchase the optional ADF from your reseller or from EPSON Accessories at
(800) 873-7766 (U.S. sales only). In Canada, please call (800) 873-7766 for dealer
referral. Or visit our web site at www.epsonsupplies.com (U.S. sales only).
Using the Optional ADF
Chapter 3
Advertisement
Related Manuals for Epson GT-10000
Summary of Contents for Epson GT-10000
- Page 1 (OCR) scanning or for creating an image database. To use the ADF with your OCR software, you must install EPSON TWAIN Pro or the ISIS driver that comes with the optional ADF. (See the ISIS Driver Guide that comes with the optional ADF for instructions.)
-
Page 2: Unpacking The Optional Adf
Unpacking the Optional ADF Make sure the following items are included in the ADF box. Contact your EPSON dealer if anything is missing or damaged. stopper ISIS Driver guide knobs paper out support ISIS Software CD-ROM installation screws screwdriver tool... - Page 3 3. Insert the installation screws that came with the ADF into the holes in the back of the scanner and secure them with the enclosed screwdriver tool, as shown below. 4. Place the two knobs included with the ADF beside the scanner. 5.
- Page 4 6. Twist the knobs onto the ends of the screws and tighten them using the enclosed screwdriver tool. 7. Attach the ADF’s connector to the scanner’s ADF interface. Secure the connection by tightening the connector screws.
-
Page 5: Loading Documents
8. Peel off the backing from the stopper and from the paper out support provided with the ADF. Then attach the stopper and paper out support to the scanner as shown. Insert the tabs on the paper out support into the slots at the right end of the document table. - Page 6 Has no cut-out areas. How you load your document depends on the scanner driver you use. Follow these guidelines when you place your document in the ADF: Type of Using the EPSON TWAIN Pro driver Using the ISIS driver document One-sided...
- Page 7 2. Place your document in the ADF. If you’re using EPSON TWAIN Pro or EPSON TWAIN Pro Network, arrange your stack of originals face up. Follow these guidelines when inserting paper: Portrait orientation (top and bottom edges are shorter than the side edges)—...
- Page 8 3. Slide the edge guides to the edges of your paper. 4. Follow the steps in “Scanning From Start to Finish” on page 46 to scan your document.