Loading Documents - Epson GT-10000 User Manual

8. Peel off the backing from the stopper and from the paper out support provided
with the ADF. Then attach the stopper and paper out support to the scanner as
shown. Insert the tabs on the paper out support into the slots at the right end of
the document table.
stopper
9. Close the ADF.

Loading Documents

The ADF can hold up to 50 sheets of the following paper sizes, based on a paper
weight of 17 pounds (64 g/m
Paper size
A3, Ledger, B4, Legal, A4, Letter, B5, A5, 5.5
(140 148 mm)
A4, Letter, B5, A5
You can also load documents manually while the ADF is installed. Open the ADF
and place the document on the document table. Then close the ADF and scan the
document as described in "Scanning From Start to Finish" on page 46.
See "Documents Supported" on page 113 for complete
paper requirements.
2
) and a thickness of 0.2 inch (6.0 mm) or less:
5.8-inch
paper out support
Direction
Portrait
Landscape
Using the Optional ADF
39