Green Ethernet; Port Isolate - Planet Networking & Communication SGS-5240 Series User Manual

4.2.2.5 Green Ethernet

Switch Management>Interface>Green Ethernet page is used to enable power savings mode on the selected port.
These parameters are displayed:
 Port – Power saving mode only applies to the Gigabit Ethernet ports using copper media.
 Power Saving Status – Adjusts the power provided to ports based on the length of the cable used to connect to other
devices. Only sufficient power is used to maintain connection requirements. (Default: Enabled on Gigabit Ethernet RJ-45
ports)

4.2.2.6 Port Isolate

Switch Management>Interface> Port Isolate page is used to enable traffic segmentation.
 Status – Enables port-based traffic segmentation. (Default: Disabled)
 Traffic pass through uplink ports – Specifies whether or not traffic can be forwarded between uplink ports assigned to
different client sessions.

No – Blocks traffic between uplink ports assigned to different sessions.

Yes – Forwards traffic between uplink ports assigned to different sessions.
User's Manual of SGS-5240 Series Managed Switch
50