Static Table; Dynamic Binding - Planet Networking & Communication SGS-5240 Series User Manual

L2+ stackable managed gigabit ethernet switch with 10gbe uplink
Table of Contents

Advertisement

dynamic entries discovered by DHCP snooping and static entries set by IP source guard.

4.7.13.2 Static Table

Security > IPv4 Source Guard > Static Table page is used to bind a valid static IP source guard entry to a port in ACL mode.
◆Port–The port to which a static entry is bound.
◆VLAN–ID of a configured VLAN (Range: 1-4094)
◆IP Address –A valid unicast IP address, including classful types A, B or C.
MAC Address–A valid unicast MAC address.

4.7.13.3 Dynamic Binding

Security > IPv4 Source Guard > Dynamic Binding page is used to display the source-guard binding table for a selected interface.
Query by
 Port – A port on this switch.
 VLAN – ID of a configured VLAN (Range: 1-4093)
 MAC Address – A valid unicast MAC address.
 IP Address – A valid unicast IP address, including classful types A, B or C. Dynamic Binding List
 VLAN – VLAN to which this entry is bound.
 MAC Address – Physical address associated with the entry.
 Interface – Port to which this entry is bound.
 IP Address – IP address corresponding to the client.
 Lease Time – The time for which this IP address is leased to the client.
User's Manual of SGS-5240 Series Managed Switch
239

Advertisement

Table of Contents
loading

Table of Contents