Nortel DECT 4027 User Manual page 48

DECT system configuration
48
Get user manuals: See SafeManuals.com
2. Press the
option.
Register
3. Press the
Select
process.
4. Press the
following:
If the handset is subscribed to fewer than four
systems, choose
Empty
OR
If the handset is already subscribed to four
systems, choose the name of the system to
overwrite.
5. Press the
Select
soft key if you want to overwrite a system.
Yes
The
6. Use the
Attention: If more than one DECT system overlaps
Save
in your location, you are sometimes required to
enter a PARK code (system ID). If only one DECT
system is available, make no entry, and press the
Skip
7. Press the
The
8. Use the
code).
9. Press the
OK
The
Up or Down key to highlight the
Select soft key to start the registration
Up or Down key to choose one of the
Empty
Select soft key, and then press the
PARK prompt appears.
Dialpad to enter the PARK code.
soft key.
Save soft key.
PIN prompt appears.
Dialpad to enter the PIN (authorisation
OK soft key.
Network name prompt appears.
Register
Yes