Configuring The Time And Date - Nortel DECT 4027 User Manual

Configuring the time and date

Use the time and date option to configure the time and date.
Get user manuals: See SafeManuals.com
4. Press the
profile
Edit profile
5. Press the
Select
6. Press the
option.
7. Press the
Select
8. Make the required changes and perform one of the
following:
Select
Press the
OR
OR
Press the
OK
9. Press the
idle display.
WARNING
You must charge your handset before you configure the
handset time and date. Each time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system can provide the date and time information
to DECT handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
Up or Down key to highlight the
option.
Select soft key.
Up or Down key to highlight the required
Select soft key.
Select soft key.
OK soft key.
Clr key one or more times to return to the
Telephone settings
Edit
153