Table of Contents
Advertisement
Handset accessories
to use Bluetooth wireless technology. For more information about
handset controls, see
Attention: This feature is available on the DECT 4070 and 4075
To install or remove the Bluetooth wireless technology module, you must
remove the battery pack.
Installing the Bluetooth wireless technology module on your DECT
4070 or 4075 Handset
To install the Bluetooth wireless technology module on your DECT 4070
or 4075 Handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
3. Slide the Bluetooth wireless technology module into the compartment
4. Replace the cover after you reinstall the battery pack as shown in
226
Get user manuals:
See SafeManuals.com
"Handset controls" (page
Handsets only. Contact your system administrator to
determine if you can use the Bluetooth wireless technology
feature with your handset.
Note: For information about removing the DECT 4027 or 4070
handset battery compartment cover, see
(4027 and 4070 only)" (page 18).
Note: For information about removing the DECT 4075 handset
battery compartment cover, see
pack (4075 only)" (page 218).
as shown in
Figure 28.
Note: On the DECT 4075 Handset, the Bluetooth wireless technology
compartment is oriented 90 degrees clockwise in comparison to
DECT 4070 handset.
Figure
2.
35).
"Installing the battery pack
"Removing and installing the battery
Advertisement
Table of Contents
