Husqvarna AUTOMOWER 535 AWD Operator's Manual page 42

Symptoms Cause
The battery is empty If the battery has been deeply discharged,
and you put the prod- it will take a long time to charge the battery
uct in the charging and before the product can be set to ON.
station, but it does
not charge and can-
not be set to ON.
The product mows Grass or other foreign object blocks the
for shorter periods blade disc.
than usual between
The battery is spent.
charges.
Both the mowing and The battery is spent.
charging times are
shorter than usual.
The product is The STOP button has been activated.
parked for hours in
the charging station.
Parking mode is activated.
The product is not allowed to operate if the
battery temperature is too high or too low.
Uneven mowing re- The product works too few hours per day.
sults.
The settings for
incorrect in relation to the layout of the work
area.
The shape of the work area requires the use
Area 1-5 for the product to find its way to
of
all remote areas.
The work area is too large.
Blunt blades.
Long grass in relation to the set cutting
height.
Accumulation of grass by the blade disc or
around the motor shaft.
The product is not The product has not been connected to the
connected to the Au- app before and the product is not included in
®
tomower Connect the list
app. nect app.
42 - Troubleshooting
Lawn coverage function are
My mowers in the Automower
Action
Keep the product in the charging station for
24 hours and test if the product can be set
to ON. If the problem remains, speak to your
authorized service technician.
Remove and clean the blade disc. Refer to
To clean the blade disc on page 29 .
Replace the battery. Refer to
page 33 .
Replace the battery. Refer to
page 33 .
Make sure that the START button is pushed
down.
Select the operating mode in Automower
Connect.
Check that the charging station is placed in
an area with protection from the sun.
Increase the mowing time. Refer to
on page 21 .
Examine the settings for the
function. Refer to Lawn coverage.
Area 1-5 to steer the product to a re-
Use
mote area. Refer to
23 .
Try to limit the work area or extend the work
Schedule on page 21 .
time. Refer to
Replace all the blades. Refer to
ment of the blades on page 30 .
Increase the cutting height and then succes-
sively lower it.
Check that the blade disc rotates freely and
easily. If not, screw off the blade disc and
remove grass and foreign objects. Refer to
To clean the blade disc on page 29 .
Do a pairing operation between the product
and the mobile device.
® Connect and the product on page 18 .
Con-
Battery on
Battery on
®
Schedule
Lawn coverage
Lawn coverage on page
Replace-
®
To pair Automower
1427 - 009 - 20.12.2022