Setting Duplex (Double-Sided) Copying - Epson AcuLaser CX37DN Series User Manual

Setting Duplex (Double-Sided) Copying

Duplex (Double-Sided) Copying From the ADF
With duplex (double-sided) copying, two single-sided document pages can be scanned with the ADF
and printed onto a single sheet of paper.
1. In the main screen (Copy mode), press the u or d key to select the current simplex/duplex
(single-sided/double-sided) setting, and then press the Select key.
2. Press the u or d key to select 1-SIDE & 2-SIDE, and then press the Select key.
3. Press the u or d key to select LONG EDGE or SHORT EDGE, and then press the Select key.
The main screen (Copy mode) appears again.
Note:
When LONG EDGE or SHORT EDGE is selected, duplex (double-sided) copying is performed as
described below.
1
1 1
1 3
1
1
1
3
Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the document on the original glass.
Epson AcuLaser CX37 Series
If LONG EDGE is selected, the pages will be laid out to flip at the sides.
If SHORT EDGE is selected, the pages will be laid out to flip at the top.
Printer/Copier/Scanner User's Guide
Using the Copier 134