Scanning With The Machine; Basic Scanning Operation - Epson AcuLaser CX37DN Series User Manual

Scanning With the Machine

The machine keys can be used to make scans. This operation differs from scanning from a computer
application since the destination of the scan data can also be specified.
Note:
If, while specifying settings, no key is pressed for the length of time specified for AUTO PANEL RESET, the
entered settings are canceled and the main screen (Scan mode) is displayed.

Basic Scanning Operation

1. Press the Scan key to enter Scan mode.
2. Position the document to be scanned.
Note:
For details on positioning the document, refer to "Loading a Document" on page 112.
3. Specify the desired scan settings.
4. To scan color scans, press the Start (Color) key. To scan monochrome scans, press the Start
(B&W) key.
If the document was loaded in the ADF, scanning begins, and then the data is sent to the specified
location. If the document was placed on the original glass, continue with step 5.
5. When NEXT PAGE? appears in the message window, place the second document page on the
original glass, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 145