Paper Setup Menu - Epson AcuLaser CX37DN Series User Manual

CALIBRATION

PAPER SETUP Menu

Note:
Manufacturer's default settings appear in bold.
TRAY1 PAPER
Epson AcuLaser CX37 Series
Settings
Select whether or not to perform image stabilization. If ON is selected,
image stabilization is started.
Note:
The Calibration function consumes toner.
Media type
PLAIN PAPER / THICK PAPER / THICK PAPER2 / LABELS /
LETTERHEAD / GLOSSY / GLOSSY2 / SINGLE SIDE ONLY /
SPECIAL PAPER / ENVELOPE / POSTCARD
Paper size When a setting other than ENVELOPE or POSTCARD is selected:
A4 / A5 / B5 / LEGAL / LETTER / G LETTER / STATEMENT /
EXECUTIVE / FOLIO / G LEGAL / 8 1/2 x 13 1/2 / CUSTOM
When ENVELOPE is selected: COM10 / C6 / DL / MONARCH /
CHOU#3 / CUSTOM
When POSTCARD is selected: J-POSTCARD 100x148 /
D-POSTCARD 148x200 / CUSTOM
Select the type and size of the media loaded into Tray 1. If CUSTOM is selected as the
paper size, specify settings for LENGTH and WIDTH separately.
The Setting range for LENGTH is 148 to 356 mm.
The default setting is 297 mm.
The Setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
When a media type is selected, a screen appears, showing the available media sizes.
The available media sizes differ depending on the selected media type.
Note:
The setting for CUSTOM is displayed in metric (mm) even if ADMIN. MANAGEMENT/USER
SETTING/PRESET ZOOM is set to INCH.
Printer/Copier/Scanner User's Guide
ON / OFF
Control Panel and Configuration Menu 52