Dual In-Line Memory Module (Dimm); Installing A Dimm - Epson AcuLaser CX37DN Series User Manual

Dual In-Line Memory Module (DIMM)

Note:
❏ You may need additional memory (DIMM) for complex graphics and for duplex (double-sided)
printing.
❏ This machine detects only half of the amount of the installed memory.
Dual in-line memory module (or DIMM) is compact circuit board with surface-mount memory
chips.
The standard printer memory is 256 MB which can be expanded to a maximum of 768 MB. Copier
memory is fixed at 128 MB.

Installing a DIMM

Note:
It's very important to protect the printer controller board and any associated circuit boards from
electrostatic damage. Before performing this procedure, see "Antistatic Protection" on page 236. In
addition, always handle circuit boards by the edges only.
1. Turn off the machine and disconnect the power cord and interface cables.
2. Remove the rear cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Installing Accessories 237