Rack-Mounting OS6450 Switches
3
Place bracket plate over front and rear brackets and secure with thumb screws.
4
Attach rack mount brackets to both sides of the front of the chassis.
5
Using one additional person, lift and position the assembly on the rack until the rack-mount flanges are
flush with the rack post.
6
Align the holes in the flanges with the rack holes and insert rack mount screws (not provided) through
the bottom hole of each flange and then the top of each flange. Tighten both screws until they are secure.
page 3-8
Secure Front and Back with Bracket Plate
Attach Rack Mount Brackets
OmniSwitch 6450 Series Hardware Users Guide
Mounting OmniSwitch 6450 Series Switches
Bracket Plate and Screws
November 2011