Select Measurements - Agilent Technologies 8960 Series Operation Manual

B. Select measurements.
The gray boxes indicate that
the measurement is being
made, but the results are
not being displayed.
These black boxes
indicate that phase
and frequency error
measurement results
are being displayed in
the lower measurement
window, and bit error
measurement results
are being displayed in
the upper
measurement window.
1. Press the
Measurement selection
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to add measurements.
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started
How Do I Make Measurements on a Mobile?
key.
1
89