cdma2000 Measurement Procedures
Measuring Code Domain Power and Code Domain Power +
Noise
These measurements can be made only when one of the following radio
configurations (see
"How Do I Set Up a Call?" on page
52) is selected:
• (Fwd3, Rvs3)
• (Fwd4, Rvs3)
• (Fwd5, Rvs4)
1. Select the Waveform Quality/Code Domain measurement (see
"B. Select
measurements." on page
48).
79
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started