Measuring Analog Transmit Power - Agilent Technologies 8960 Series Operation Manual

Measuring Analog Transmit Power

This measurement can only be performed with the mobile on an analog voice channel
(AVC).
1. Establish a call with the mobile on an analog voice channel.
2. Press the
Measurement selection
3. Select the Analog Transmit Power measurement.
4. Press the Analog Transmit Power Setup (
5. Set the measurement parameters as needed for your measurement situation.
To see the effects of sending a power level change command to the mobile, press Anl
MS TX Level ( ) and slowly change the setting while observing the Analog Transmit
F9
Power display.
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started
key.
Observe how sending a change power level
command causes the mobile's output
level to change.
AMPS/136 Mobile Measurements
) key.
F1
43