Measuring Phase And Frequency Error - Agilent Technologies 8960 Series Operation Manual

GSM Mobile Measurements

Measuring Phase and Frequency Error

1. Establish a call with the mobile.
2. Press the
Measurement selection
3. Select the Phase & Frequency Error measurement.
4. Press the Phase & Freq. Setup (
5. Set the measurement parameters as needed for your measurement situation,
including:
Measurement Timeout = 10 s
A typical phase and frequency error measurement result is shown above.
6. Press the Change View (
144
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\gsm_man_measurements.fm
key.
) key.
F1
) key.
F2