Select Measurements - Agilent Technologies 8960 Series Manual Operation

B. Select measurements.
The gray boxes indicate
that the measurement is
being made, but the results
are not being displayed.
These black boxes indicate
that adjacent channel
power measurement results
are being displayed in the
lower measurement
window, and frequency
modulation measurement
results are being displayed
in the upper measurement
window.
1. Press the
Measurement selection
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to add measurements.
Chapter 1
key.
AMPS/136 Mobile Test Application
How Do I Make Measurements on a Mobile?
2
1
21