6. Press the FCH Service Option Setup (
the radio configurations you plan on testing.
SO55 (Service Option 55) is not supported by some mobile stations. If
NOTE
your mobile station does not support SO55 calls cannot be connected,
and you will need to select one of the other loopback or echo service
options.
7. Check the rest of the Call Parms settings by pressing the
of 3 and 3 of 3 menus.
8. You may need to change cell settings such as SID (System Identification) to allow
the mobile station to find service. See
page
57.
9. Turn on power to the mobile station and wait for an indication that it has found
service.
10.Make a mobile station originated call (by entering a phone number and pressing
SEND on the mobile station handset); or, wait for the mobile station to perform a
power up registration and press the Originate Call (
11.Verify that the call is connected.
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started
) key and set the service option for
F12
More
"How Do I Change Cell Information?" on
F3
How Do I Set Up a Call?
key to display the 2
) key.
53