Sony STR-AZ3000ES Startup Manual page 91

Using the active subwoofers
Connecting 9.1.4-channel speaker system using front wide speakers (for STR-AZ7000ES)
Connecting 7.1.6-channel speaker system (for STR-AZ7000ES)
Connecting 5.1.5.3-channel speaker system (360RA Reference configuration) (for STR-AZ7000ES)
Connecting 7.1.4-channel speaker system (for STR-AZ7000ES/STR-AZ5000ES)
Connecting 7.1.2-channel speaker system with two center speakers (for STR-AZ7000ES/STR-AZ5000ES)
Connecting 7.1.2-channel speaker system using front Dolby Atmos enabled speakers
Connecting 7.1.2-channel speaker system
Connecting 7.1-channel speaker system
Connecting 5.1.4-channel speaker system using top front and top rear speakers
Connecting 5.1.2-channel speaker system using top middle speakers
Connecting 7.1-channel speaker system with Zone 2 connection
Connecting 5.1.2-channel speaker system with bi-amplifier connection
Speaker patterns and terminals to be connected (for STR-AZ7000ES)
Speaker patterns and terminals to be connected (for STR-AZ5000ES)
Speaker patterns and terminals to be connected (for STR-AZ3000ES)
Connecting to Sony wireless rear speakers/subwoofer
3. Connecting a TV
Notes on TV connection
Connecting a TV compatible with the eARC or ARC function using an HDMI jack
Connecting a TV incompatible with the eARC and ARC functions using an HDMI jack
Connecting a TV with jacks other than HDMI jacks
Connecting a TV and a projector using an HDMI jack
Setting TV audio output (when using the eARC/ARC function)
Setting TV audio output (when not using the eARC/ARC function)
When your TV has the S-CENTER SPEAKER IN jack
4. Connecting audio-visual devices and the antennas (aerials)
Connecting devices with HDMI jacks
Connecting devices when an eARC/ARC compatible HDMI jack of your TV is not compatible with the 8K video format
Connecting devices with jacks other than HDMI jacks
Connecting a USB device
Connecting the antennas (aerials)
5. Connecting to the network
Connecting a LAN cable (for wired LAN connections only)
Preparing a wireless LAN antenna (for wireless LAN connections only)
6. Turning on the receiver/preparing the remote control
Inserting batteries into the remote control
Assembling the calibration mic stand
Connecting the calibration microphone
Turning on the receiver
Notes on installing the receiver
7. Setting up the receiver using Easy Setup
About Auto Calibration
Before you perform Auto Calibration
Auto Calibration operation
Selecting the front speakers
Checking Auto Calibration results
Enjoying Video and Sound
Content that can be played on this receiver
How to use the menu of the receiver
2