Sony STR-AZ3000ES Startup Manual page 310

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Setting the crossover frequency of the speakers (Crossover Frequency)
You can set the bass crossover frequency of speakers for which [Manual Speaker Settings] - [Size] has been set to [Small] in the [Speaker Settings] menu. A measured speaker
crossover frequency is set for each speaker after the Auto Calibration is performed.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Manual Speaker Settings].
2
Select [Crossover Frequency].
3
4 Select the speaker for which you want to adjust the crossover frequency on the screen.
Set the crossover frequency of the selected speaker.
5
Note
The surround back speakers will be set to the same setting as that of the surround speakers.
5-037-021-11(1) Copyright 2022 Sony Corporation
221