Make sure you have connected to both the L and R jacks of an analog device, as analog devices require both L and R jack connections. Use an audio cable (not supplied).

Adjust the speaker level.

Check that the speaker settings are appropriate for the setup using [Auto Calibration] or [Manual Speaker Settings] – [Speaker Pattern] in the [Speaker Settings] menu. Then

check that sound is output from each speaker correctly using [Test Tone] in the [Speaker Settings] menu.

Check that the subwoofer is connected correctly and securely.

Make sure you have turned on your subwoofer.

Depending on the selected sound field, sound may not be available from the subwoofer.

314

Table of Contents