Sony STR-AZ3000ES Startup Manual page 182

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Connecting to Sony wireless rear speakers/subwoofer
The receiver is compatible with connection to Sony wireless rear speaker/subwoofer (not supplied).
When you connect the wireless rear speaker/subwoofer to the receiver for the first time, follow the steps below.
Once the Sony wireless rear speaker/subwoofer turns on, it will automatically connect to the receiver.
1.
Select [Setup] - [Speaker Settings] from the home menu.
2.
Select [Wireless Speaker Settings].
3.
Select [Start manual linking].
4.
Press LINK on the speaker (not supplied).
The power indicator of the speaker flashes twice repeatedly in green.
5.
Select [Start].
The manual connection starts. The connecting process appears on the TV screen. To cancel the manual connection, select [Cancel].
6.
When [Connected] is displayed for the target speakers, select [Finish].
7.
Press (enter).
The manual connection is established and the power indicators of the speaker light up in green.
8.
Follow the on-screen instructions to perform Auto Calibration.
When the connection settings of wireless speakers are complete, a screen that guides you to [Auto Calibration] is displayed.
When you connect a wireless rear speaker, select either [Surround] or [Surround Back] on the [Wireless Speaker Assign] screen in [Auto Calibration] to assign the speaker
position.
Hint
For the latest information about the compatible wireless rear speaker/subwoofer models, visit the Sony website.
If you connect 2 wireless subwoofers, use the same model.
For details on the wireless rear speaker/subwoofer, refer to the operating instructions supplied with each speaker.
If the wireless communication is unstable
If you use multiple wireless devices, such as a wireless LAN router, the wireless signals may become unstable. In this case, the wireless communication may be improved by
changing the following setting.
1.
Select [Setup] - [Speaker Settings] from the home menu.
2.
Select [Wireless Speaker Settings].
3.
Select [RF Channel].
4.
Select the setting you want.
[On]: Normally select this setting. The receiver automatically selects the optimum frequency with wireless interference resistance for better wireless communication.
[Off]: The receiver selects a channel from the limited frequency band to prevent external wireless interference. If sound dropping occurs while [On] is selected, it may be
improved by selecting [Off].
Note
If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute to reconnect.
5-037-021-11(1) Copyright 2022 Sony Corporation
93