If the HDMI video signal output is set to [HDMI OFF] or [HDMI B], select [HDMI A] or [HDMI A+B] by pressing HDMI OUT on the receiver or remote control.

Set your TV to the appropriate input mode.

Make sure that cables are correctly and securely connected to devices.

Disconnect the HDMI cable from the receiver and TV and then reconnect the cable.

Change the [HDMI Signal Format] setting of the selected input in the [HDMI Settings] menu.

Some playback devices need to be set up. Refer to the operating instructions supplied with each device.

Be sure to use a Premium High Speed HDMI Cable with Ethernet, which supports bandwidths up to 18 Gbps. For video signals that require a high bandwidth such as 4K/120p,

8K, etc., be sure to use an Ultra High Speed HDMI Cable that supports bandwidths up to 48 Gbps.

If you want to play HDCP 2.2 or HDCP 2.3 content, connect the receiver to an HDMI input jack of a TV that is compatible with HDCP 2.2 or HDCP 2.3.

Composite video signal input from VIDEO IN jacks cannot be output to HDMI OUT A or HDMI OUT B (ZONE 2) jacks.

Digital video signals input to the HDMI IN jacks of this receiver are output only from the HDMI OUT A or HDMI OUT B (ZONE 2) jack. Analog video signals input to the VIDEO IN

jacks are output only from the VIDEO OUT MONITOR jack. For details, see