Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Switching between digital and analog audio (Input Mode)
When you connect devices to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either device, or switch from one to the other, depending
on the type of material you intend to watch.
Select [Setup] - [Input Settings] from the home menu.
1
Select [Assignment].
2
Select [Input Mode].
3
Auto: Gives priority to digital audio signals. If there is more than one digital connection, HDMI audio signals have priority. If there are no digital audio signals, analog audio
signals are selected.
When TV input is selected, priority is given to eARC or ARC signals. If your TV does not support the eARC or ARC function, digital optical audio signals are selected.
Optical: Specifies input of digital audio signals to the DIGITAL OPTICAL IN 2 (TV) jack.
Coaxial: Specifies input of digital audio signals to the DIGITAL COAXIAL IN (SA-CD/CD) jack.
Analog: Specifies input of analog audio signals to the AUDIO IN (L/R) jacks.
Note
Depending on the input, [Optical], [Coaxial] or [Analog] may not be displayed.
5-037-021-11(1) Copyright 2022 Sony Corporation
185
Advertisement
Chapters
Table of Contents
