Nortel SRG200 Configuration Manual page 52

Release 1.5 survivable remote gateway
Hide thumbs Also See for SRG200:
Table of Contents

Advertisement

52
Chapter 5 Setting up IP telephones
There are three fields that define the password registration process (see
Enable registration, Enable global registration password, and Global password.
Table 12 Password registration parameters
Enable registration
Enable global registration
password
Global password
Figure 7 Telephony Resources panel, IP and App Sets
N0075588
N0075588
Must be selected to allow IP telephones to register.
Select if a password is going to be entered in the next
field, Global password.
If selected, the installer must enter the Global password
(below) at the IP telephone before the telephone can be
configured.
Enter the password.
If no password is entered, or the Enable global
registration password is not selected, no password is
required to configure the IP telephone.
Note: Nortel recommends that you synchronize this
password with the CS 1000 password.
Table
12):

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srg400Bcm 4.0

Table of Contents