Nortel SRG200 Configuration Manual page 44

44 Chapter 4 CS 1000 considerations
Table 7 S1000 settings (Sheet 2 of 3)
Field
Test Local Mode Timer
H323 ID
Numbering Plan ID
Type of Number
N0075588 N0075588
Values
10 minutes (default)
Range:
2 to 10 minutes
SRG* (default)
*This setting must be changed.
Refer to the BCM 4.0 Networking
Configuration Guide for naming
conventions.
Unknown
ISDN/Telephony (E.164)
Private
Telephony (E.163)
Telex (F.69)
Data (X.121)
National Standard
Default: Private
Unknown
International Number
National Number
Special Number
Subscriber Number
ESN LOC (UDP)
ESN CDP
ESN Special Number
Default: ESN CDP (for CDP dialing
plans) (BUID = DN)
UDP dialing plans: select ESN
LOC (UDP) (BUID = LOC+DN)
Description
Period that an IP telephone remains in local mode
after being set in local mode manually. Telephone
returns to normal mode automatically at the end of
the time-out.
Local mode can be invoked by the Test Local Mode
button on the telephone or by command from the
main office.
Gatekeeper setting that identifies the SRG.
This value must match the value in the Alias
names field of the Local IP gateway:
Configuration > Resources > Telephony
Resources > Modules panel > Module type
column: select IP Trunks > Details for Module:
Internal details panel > Local Gateway tab >
Gatekeeper Support subpanel > Alias names
field (refer to "Configuring VoIP trunking" on page
71).
The type of numbering plan at the main office.
The main office dialing plan.
Ensure that the SRG private dialing plan is
configured to match the selected value.