Nortel SRG200 Configuration Manual page 82

82 Chapter 7 Considerations for PSTN access and analog devices
7 Assign both the PSTN and VoIP trunk line pools to all telephones that are allowed to make
calls over the PSTN or to the main office over the VoIP trunk.
If you want the analog telephones to emulate local mode call functionality always, assign only
the PSTN line pool to the analog devices.
8 On the Active Sets panel (Configuration > Telephony > Sets > Active Sets, see
select the Capabilities and Preferences tab, then select the Capabilities tab in the Details
panel.
9 Set Handsfree to None.
10 Clear the HF Answerback check box.
11 Clear the Paging check box.
12 Select the Allow Redirect check box if you want the user to be able to call forward to the main
office or redirect lines to the main office.
N0075588 N0075588
Figure 18),