Initializing Norstar Voice Mail - Nortel Voice Mail Software Manual

34 Upgrading a Norstar Voice Mail system with a 270 MB hard disk drive

Initializing Norstar Voice Mail

You must initialize the Norstar Voice Mail 4.1 software before you can restore the
Norstar Voice Mail programing.
To initialize the Norstar Voice Mail software:
ENG
US
YES NO
Norstar Voice Mail 4.1 Software Upgrade Guide
1. Press Ä á ¡Ü .
2. Enter the installer password Û ß ß Ü Ý Ý
OK
(CONFIG) and press
3. Press .
Note: After you accept the two languages, the other
languages are deleted. You will not be able to
load the other languages even if you re-
initialize Norstar Voice Mail.
4. Press . To select Canadian English, press
There are two differences between the US English and
Canadian English voice prompts. In US English, £
is referred to as "pound" and ó is pronounced "zee".
In Canadian English, £ is referred to as "number
sign" and ó is pronounced "zed".
5. Press . To select French as the Second Language,
press .
6. Press to accept the two languages. Press
OK
change the languages.
Note: Make sure the two languages shown on this
display are the languages you want to keep
before you accept the language choice. After
you accept these two languages, the other
languages are deleted. You will not be able to
load the other languages even if you re-
initialize Norstar Voice Mail.
7. Press .
8. Press . Press
primary language.
.
if you want Spanish as the
P0994576 Issue 01
.
to