Loading The Norstar Voice Mail 4.1 Software; Attaching The Cd-Rom To The Nam - Nortel Voice Mail Software Manual

18 Norstar Voice Mail 4.1 Software Upgrade

Loading the Norstar Voice Mail 4.1 software

Before you load the Norstar Voice Mail 4.1 software, you must attach the
CD-ROM.

Attaching the CD-ROM to the NAM

The CD-ROM drive is attached to the NAM using a parallel cable that attaches to
the NAM parallel port. Ports are located at the bottom of the NAM and are accessed
through the cable trough.
Module external points of connection for the eartlier NAMs and NAM II
Module external points of connection for the new NAM
Serial ports
Parallel port
To attach the CD-ROM drive to the NAM:
1. Connect the end of the parallel cable to the connector on the CD-ROM drive
labeled "COMPUTER".
2. Connect the other end of the cable to the NAM parallel port.
3. Connect the AC adapter power plug into the rear of the CD-ROM drive and
plug the other end into the AC outlet.
Norstar Voice Mail 4.1 Software Upgrade Guide
Serial ports
Parallel A
port
B
Keyboard
Mouse
P0994576 Issue 01