Fatal Error Messages - Nortel ICS User Manual

Message:
<item> cannot be accessed at this time. Try later.
Explanation: You cannot view or change the programming item because the ICS is busy.
Suggested response: Continue with other programming tasks and return to the item later.

Fatal error messages

If you click OK or EXIT in a fatal error message window, the Browser tool window is closed. To
restart the tool, click on the Browser icon or select the Browser tool from the Run Tool menu.
Message:
There is not enough memory to continue the current application.
Please close any other applications not in use and restart this
application.
OR
Out of memory.
Explanation: The Browser tool has run out of memory.
Suggested response:
Click OK. The Browser window disappears.
1
Close any other applications running on your computer.
2
Click the Browser tool icon or select the Browser tool from the Run Tool menu.
3
Message:
Installation error #<x>. Please contact your system
administrator.
Explanation: Files in the ICSRT application are damaged.
Suggested response: Restore the corrupted file by re-installing Norstar Remote Utilities. If
this error occurs after ICSRT has been re-installed, contact Nortel technical assistance and
give them the error number.
Message:
Internal application #<x>. Please contact your system
.
administrator
Explanation: An error internal to the application has occurred.
Suggested response: Contact Nortel technical assistance and give them the error number.
Message:
The RAD functionality is not enabled at the <target> system of
the <selected> customer. Proper software keys need to be obtained and
entered through a set administrative session (F**CONFIG).
Explanation: You have tried to connect to a Compact ICS using the internal remote access
device (I-RAD), but the I-RAD has not been enabled.
Chapter 6 Understanding the Browser tool
ICS Remote Tools User Guide
77