Table 7 Olp Error Dialog Fields - Nortel ICS User Manual

Table 7 OLP Error dialog fields

Field
Sheet
Value
Errors
Cell
You can perform any of the following actions:
3
View error details
Saving the errors to the
workbook
Correcting the value
directly
Exit the dialog
Chapter 7 Using Workbooks and off-line programming
Description
This field displays the name of the worksheet where the selected
error occurred.
This is the current value entered in the indicated cell.
This is a description of the actual error. To view details, double click
on the error line or select the error line and click the Goto button. The
ICS workbook is displayed with the appropriate worksheet in view,
and the cell where the error occurred is highlighted.
This is the cell on the worksheet where the error occurred.
Warning: The references to cells found in acquisition errors are not
useful. They are generated when the tool cannot find an appropriate
cell in which to place the acquired data. This often indicates an
overflow situation. For example, if an ICS is programmed with more
than 10 overrides, overrides with index 11 or higher show up as
errors, because the workbook only has space for the first 10
overrides.
Double click on the error line or select the error line and click the
Goto button. The ICS workbook is displayed with the appropriate
worksheet in view, and the cell where the error occurred is
highlighted.
Click on Save.
The Error list is automatically saved to a worksheet, called Errors, in
the ICS workbook.
Warning: The error information you save overwrites any previous
error information saved in the workbook.
To change an error found in a cell without opening the workbook:
1. Select the contents of the Value box in the OLP Errors dialog box
2. Enter the correct information.
3. Click on Save.
Click on Close.
ICS Remote Tools User Guide
101