Configuring A Workbook; Accessing An Assigned Workbook; Figure 39 Windows Open Screen - Nortel ICS User Manual

Configuring a workbook

The ICSRT supplies default workbooks that reflect the different types of Norstar software, from
version 2.0 forward. Within these workbooks, there are further system definitions and settings that
need to be set before you use the workbook to program a system.
This section contains information about:
• "Accessing an assigned workbook" on page 85
• "Configuring the Workbook parameters" on page 86

Accessing an assigned workbook

If you created a customer record and assigned a default workbook, you can use the Select
Workbook heading under the ICSRT Run Tool menu to select and open the workbook so that you
can configure the workbook to the system parameters.
Select the customer record on the Customer Info screen to which you assigned the record.
1
From the Run Tool menu, click Select Workbook.
2
A For your information dialog may display, reminding you to save multiple copies of the
worksheets. This dialog only displays if Do not show this dialog in future checkbox on the
dialog remains unchecked. Click on OK.
A default Windows Open dialog appears, showing all the Excel workbook files that are
associated with the Norstar Customer record you selected

Figure 39 Windows Open screen

Select the workbook you want to work with.
3
Click on Open.
4
Go to "Configuring the Workbook parameters" on page 86
5
the system configuration.
Chapter 7 Using Workbooks and off-line programming
(Figure 39).
and configure the workbook with
ICS Remote Tools User Guide
85