Table of Contents
Advertisement
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Install Network Services
Perform the steps in the following procedure to install Network Services.
Copyright © 2007, Nortel Networks
.
On the MASTeam Properties dialog box, select Internet Protocol
(TCP/IP).
Click Properties.
On the Internet Protocol (TCP/IP) Properties dialog box, enter the
primary IP address, the Subnet mask, and the Default gateway.
Click Advanced.
On the Advanced TCP/IP Settings dialog box, under IP Addresses,
click Add.
On the TCP/IP Address dialog box, enter the secondary IP address
and the Subnet mask.
Click Add.
On the Advanced TCP/IP Settings dialog box, click the Options tab.
Select TCP/IP Filtering and click Properties.
On the TCP/IP Filtering dialog box, ensure that Enable TCP/IP
Filtering (all adapters) is selected.
Select Permit Only, and then click Add.
On the Add Filter dialog box, enter 80 and click OK.
On the TCP/IP Filtering dialog box, click Add.
On the Add Filter dialog box, enter 443 and click OK.
On the TCP/IP Filtering dialog box, click Add.
On the Add Filter dialog box, enter 3389 and click OK.
Click OK to save and close the dialog boxes.
If you are prompted to reboot the server, click No.
Nortel Media Application Server
MAS Installation and Commissioning
NN42020-307 01.13 Standard
4.0 8 November 2007
Install the Meet Me Web Collaboration server 165
—End—
Advertisement
Table of Contents
