Securing The Projector - BenQ W1140 User Manual

Hide thumbs Also See for W1140:
Table of Contents

Advertisement

Securing the projector

Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a security cable
to secure the projector. A security bar is located on the right side of the projector. See item 12 on
8. Insert a security cable to the opening of the security bar and secure it to a nearby fixture or heavy
furniture.
You can also purchase a lock, such as the Kensington lock, to secure the projector. There is a
Kensington lock slot on the rear side of the projector. See item 19 on
cable lock is usually a combination of key(s) and the lock. Refer to the lock's documentation for finding
out how to use it.
Utilizing the password function
Setting a password
1. Go to Advanced menu - System > Security Settings. Press OK. The Security Settings page
appears.
2. Highlight Change Password and press OK.
3. The four arrow keys ( ,
4 digits (1, 2, 3, 4). According to the password you
desire to set, press the arrow keys to enter six digits for
the password.
4. Confirm the new password by re-entering the new
password.
5. To activate the Power On Lock function, go to
System > Security Settings > Power On Lock,
press OK and
again.
• The digits being input will be displayed as asterisks on-screen. Make a note of your selected password and keep it
in a safe place in advance or right after the password is entered so that it is available to you should you ever
forget it.
• Once a password has been set and the Power On Lock is activated, the projector cannot be used unless the
correct password is entered every time the projector is started.
If you forget the password
If you enter the wrong password, the password error message
will appear, and the Input Password message follows. If you
absolutely do not remember the password, you can use the
password recall procedure. See
procedure on page
22.
If you enter an incorrect password 5 times in succession, the
projector will automatically shut down in a short time.
, , ) respectively represent
/
to select On. Input the password
Entering the password recall
page
8. A Kensington security
Input New Password
Return
Password Error
Please try again.
Operation
page
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht2060

Table of Contents