Table of Contents
Advertisement
• Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected after a set
period of time to prevent unnecessary waste of light source life.
To set Auto Power Off, go to Advanced Menu - System > Operation Settings > Power
On/Off Settings > Auto Power Off, and press /
Changing the light source
The LED light can last around 20,000 ~ 30,000 hours. In most cases, it would not be necessary to
change the light source during the projector's lifetime. When it is needed, LED light replacement is not
user-serviceable. Please contact the service center for changing LED light.
Indicators
Indicator
: Off
44
Maintenance
Power events
Stand-by mode
Powering up
Normal operation
Normal power-down cooling
Download
Light source life exhausted
Burn-in ON
Burn-in OFF
Light source events
Light source error in normal operation
Thermal events
Fan 1 error (the actual fan speed is outside the desired speed)
Fan 2 error (the actual fan speed is outside the desired speed)
Fan 3 error (the actual fan speed is outside the desired speed)
Temperature 1 error (over limited temperature)
: Orange On
: Orange Flashing
to set a period of time.
Status & Description
: Green On
: Green Flashing
: Red On
: Red Flashing
Advertisement
Table of Contents
