BenQ W1140 User Manual page 10

5. KEYSTONE
Displays the keystone menu. See
keystone on page 16
6. ECO BLANK
Used to hide the screen picture.
7. OK
Confirms the selected On-Screen Display
(OSD) menu item.
8. SOURCE
Displays the source selection bar.
9. MENU
Turns on/off the On-Screen Display (OSD)
menu.
10. LIGHT
Turns on the remote control backlight for a
few seconds. To keep the backlight on, press
any other key while the backlight is on. Press
the key again to turn the backlight off.
11. FILMMAKER MODE
Switches to FILMMAKER MODE.
12. MUTE
Toggles projector audio between on and off.
13. SOUND MODE
Displays the sound mode menu.
14. PIC MODE
Displays the picture mode menu.
10 Introduction
Correcting
for details.
15. Picture quality adjustment keys (BRIGHT,
CONTRAST, COLOR TEMP, COLOR
MANAGE, GAMMA, SHARP)
Display the setting bars for adjustments of
the appropriate picture quality values.
16. DYNAMIC IRIS
The function is not available with this model.
17. DEFAULT
Resets the current function to its default
factory setting.
18. TEST PATTERN
Displays the test pattern.
19. HDR
Displays the HDR Brightness menus.
20. CINEMAMASTER
The function is not available with this model.
21. / Volume keys
Decreases or increases the projector
volume.
22. 3D
Displays the 3D menu.
23. LIGHT MODE
Selects a suitable light power from among
the provided modes.