BenQ W1140 User Manual page 33

3. Main menu: Display
Structure
Menu
Aspect Ratio
Auto Source
Search
Source Rename
3D
HDMI Settings
Reset Display
Function descriptions
Menu
Aspect Ratio
Auto Source
Search
3D Mode
3D Sync Invert
HDMI Format
HDMI Equalizer
HDMI EDID
HDMI Device
Control
HDMI Power
On/Off Link
There are several options to set the image's aspect ratio depending on your input
signal source.
This image adjustment might impact latency in Fast Mode. We suggest setting
Aspect Ratio to Auto to enjoy low latency gaming.
If no source is detected, this function is not available, and the Screen Fill is set to 4:3 or 1:1.
• Auto
Scales an image proportionally to fit the
projector's native resolution in its
horizontal or vertical width.
• 4:3
Scales an image so that it is displayed in
the center of the screen with a 4:3
aspect ratio.
• 16:9
Scales an image so that it is displayed in
the center of the screen with a 16:9
aspect ratio.
Allows the projector to automatically search for a signal.
Options
HDMI-1/HDMI-2
HDMI-1/HDMI-2
Descriptions
Auto/4:3/16:9
Off/On
HDMI-1/HDMI-2
Auto/Frame Sequential/Frame
Packing/Top Bottom/Side by Side/Off
Disable/Invert
Auto/Limited/Full
Auto/1/2/3/4/5
Enhanced/Standard
Off/On
Off/On
Reset/Cancel
15:9 picture
4:3 picture
16:9 picture
Menu operation 33