BenQ W1140 User Manual page 31

2. Main menu: Audio
Structure
Menu
Sound Mode
User Sound EQ
Audio Output
Audio Output
Format
Mute
Volume
L/R Switch
Power On/Off
Ring Tone
Reset Audio
Function descriptions
Menu
Sound Mode
User Sound EQ
Audio Output
Audio Output
Format
Mute
Volume
100Hz/300Hz/
1kHz/3kHz/10kHz
This function utilizes treVolo and Bongiovi DPS (Digital Power Station)
Technology, which incorporates its patented algorithms with 120 calibration
points that optimizes any audio signal in real time to add depth, clarity, definition,
presence and enhanced stereo field imaging for more immersive audio experience.
The following preset sounds are available: Cinema, Music, Game, Sports, and
User.
The User mode allows you to personalize the sound settings. When selecting the
User mode, you may make manual adjustments with the User Sound EQ
function.
If the Mute function is activated, adjusting Sound Mode will turn off the Mute
function.
Select desired frequency bands (100Hz, 300Hz,1kHz, 3kHz, and 10kHz) to adjust
the levels according to your preference. The settings made here define the User
mode.
Selects the audio output from internal or external speakers.
To enjoy S/PDIF digital sound effect, make sure the SPDIF connector on the
projector is connecting to a compatible audio system.
Selects or
LPCM RAW
To enjoy 2.0/5.1/7.1 channel audio out, please check the audio format from your
player and external speakers.
Select On to temporarily turn off the projector's internal speaker or the volume
being output from the audio output jack.
To restore the audio, select Off.
Adjusts the volume level of the projector's internal speaker or the volume being
output from the audio output jack.
If the Mute function is activated, adjusting Volume will turn off the Mute
function.
Options
Cinema/Music/Game/Sports/User
-10 – +10
treVolo/S/PDIF/3.5mm Jack
LPCM/RAW
Off/On
0 – 20
Off/On
Off/On
Reset/Cancel
Descriptions
signal for
S/PDIF
audio output of the projector.
Menu operation 31