Table of Contents
Advertisement
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
A/V device
HDMI
Speakers
5
• AUDIO IN port only works when the projector input source is set to HDMI, and is connected to a DVI device via
a DVI cable with a DVI-to-HDMI adapter.
• In the connections above, some cables may not be included with the projector (see
They are commercially available from electronics stores.
• The connection illustrations are for reference only. The rear connecting jacks available on the projector vary with
each projector model.
• Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo
like FN + function key with a monitor symbol turns the external display on/off. Press FN and the labeled function
key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.
• If the selected video image is not displayed after the projector is turned on and the correct video source has been
selected, check that the video source device is turned on and operating correctly. Also check that the signal cables
have been connected correctly.
Notebook or desktop computer
RS-232
USB Type-A
1
2
3
3
HDMI
4
RS-232 cable
1
USB Type-A cable
2
HDMI cable
3
SPDIF audio cable
4
Speakers
5
Shipping contents on page
7).
Connection
17
Advertisement
Table of Contents
