Nortel Remote Gateway 9110 Release Note page 5

June 2005
How to achieve a successful implementation
The instructions provided in the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210) and the Remote Gateway 9100
Series Installation Testing—Job Aide help you achieve a successful
implementation. Specifically, pay close attention to the instructions for
configuring the following:
PBX configuration for ports, DN Discovery, and Caller ID security
PSTN numbers used to contact Remote Gateway 9100 Series units
prefix configuration in PSTN numbers on the RLC
BRI trunk configuration on the Remote Gateway 9150 unit
Remote Gateway 9100 Series naming convention
Unless otherwise specified, the term "Remote Gateway 9100 Series units" refers
to the following products:
Remote Gateway 9110 unit
Remote Gateway 9115 unit
Remote Gateway 9150 unit
Digital Telephone IP Adapter unit (Internal and External)
The product name "Remote Gateway 9100 Series" refers to all of the "Remote
Gateway 9100 Series units" as well as the RLC.
PBX terminology
Throughout this document, the term "host PBX" refers to any of the following
Nortel PBX platforms:
Meridian 1 PBX
Communication Server 1000 (CS 1000)
Communication Server 2100 (CS 2100)
1.6.0 Release Notes for Remote Gateway 9100 Series and RLC 5