About This Document - Nortel Remote Gateway 9110 Release Note

Standard 1.0

About this document

This document applies to the following firmware and software:
Release 1.6.0 firmware for the Remote Gateway 9150 units, Remote
Gateway 911x series units, Digital Telephone IP Adapter units, and Reach
Line Card (RLC)
Release 1.6.0 software for Remote Gateway 9100 Series
Release 1.6.0 software for Remote Gateway 9100 Series Configuration
Manager
Version 34 firmware for ISDN U-interface and ISDN ST-interface
Document purpose
This document describes the features, known problems, and work-arounds for
the Remote Gateway 9150 unit, Remote Gateway 911x series units, Digital
Telephone IP Adapter units, and the RLC. It also provides:
information that is not provided in the:
— Reach Line Card Installation and Administration Guide
(NTP 555-8421-210)
— Remote Gateway 9150 Installation and Administration Guide
(NTP 555-8421-215)
— Remote Gateway 911x Series Installation and Administration Guide
(NTP 555-8421-220)
— Digital Telephone IP Adapter Installation and Administration Guide
(NTP 555-8421-211)
clarification for items that can prevent the system from operating correctly
if they are not configured correctly. Refer to "How to achieve a successful
implementation" on page 5 for more details.
Who should read this document
This document is written for individuals who are responsible for the installation,
configuration, and day-to-day management of the Remote Gateway 9150 unit,
Remote Gateway 911x series unit, Digital Telephone IP Adapter unit, and RLC.
4 1.6.0 Release Notes for Remote Gateway 9100 Series and RLC