Port Mirroring Limitations; Configuring Port Mirroring With The Cli - Nortel 5510 Configuration

Address-based mirroring example
In this configuration, the designated monitor port (port 20) can be set to
monitor traffic in any of the following modes:
•
•
•
•
•

Port mirroring limitations

Configuring port mirroring with the CLI
Port mirroring can be configured with the CLI commands detailed in this
section.
show port-mirroring command
The show port-mirroring command displays the port mirroring
configuration.
The syntax for the show port-mirroring command is:
show port-mirroring
The show port-mirroring command is executed in the Privileged
EXEC command mode.
port-mirroring command
The port-mirroring command sets the port mirroring configuration.
The syntax for the port-mirroring command is:
Copyright © 2005 - 2007, Nortel Networks
.
Monitor all traffic transmitted from address A to any address.
Monitor all traffic received by address A from any address.
Monitor all traffic received by or transmitted by address A.
Monitor all traffic transmitted by address A to address B.
Monitor all traffic between address A and address B (conversation
between the two stations).
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitoring
NN47200-505 03.01 Standard
5.1 27 August 2007
Port mirroring 27