Nortel 5510 Configuration page 29

Parameter
XrxYtxOrXtxYrx
XrxOrYtx
macaddr
Asrc
Adst
AsrcOrAdst
AsrcBdst
AsrcBdstOrBsrcAdst
The port-mirroring command is executed in the Global Configuration
command mode.
no port-mirroring command
The no port-mirroring command disables port mirroring.
The syntax for the no port-mirroring command is:
no port-mirroring
The no port-mirroring command is executed in the Global
Configuration command mode.
Configuring port mirroring with the Web-based Management Interface
Port mirroring can also be configured in the Web-based Management
Interface.
To configure port mirroring, follow this procedure:
Step
1
Copyright © 2005 - 2007, Nortel Networks
.
Action
Open the Port Mirroring screen by selecting Applications > Port
Mirroring from the menu. This screen is illustrated below.
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitoring
NN47200-505 03.01 Standard
5.1 27 August 2007
Description
Mirror packets received on port X and
transmitted on port Y or packets received on
port Y and transmitted on port X. Note: Do
not use this mode for mirroring broadcast and
multicast traffic.
Mirror packets received on port X or transmitted
on port Y.
Enter the MAC address in format H.H.H.
Mirror packets with source MAC address A.
Mirror packets with destination MAC address A.
Mirror packets with source or destination MAC
address A.
Mirror packets with source MAC address A and
destination MAC address B.
Mirror packets with source MAC address A and
destination MAC address B or packets with
source MAC address B and destination MAC
address A.
Port mirroring 29