Nortel 5510 Configuration page 24

Ethernet routing switch 5500 series
Hide thumbs Also See for 5510:
Table of Contents

Advertisement

24 Chapter 1 General System Monitoring Considerations
In
" IGMP syslog messages" (page
" IGMP syslog messages" (page 24)
and their severity.
IGMP syslog messages
Severity
Informational
Critical
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Copyright © 2005 - 2007, Nortel Networks
.
Stack Join events
IGMP messages -- Report, Leave and Query messages received by
the switch
Note: Events such as reception of IGMP messages happen frequently
in the switch, whenever a new host joins or leaves a group. Logging
such messages consumes a lot of log memory.
Therefore, such messages should not be logged in all the time. By
default, logging in of such messages is disabled. This feature must be
enabled through the CLI to view such messages.
%d represents a decimal value for the parameter preceding it. For
example, 5 for VLAN 5
%x represents a hexadecimal value for the parameter preceding it. For
example, 0xe0000a01 for Group 224.0.10.1
Log Messages
IGMP initialization success
IGMP initialization failed: Error code %d
IGMP policy initialized
IGMP configuration loaded successfully
IGMP configuration failed. Loaded to factory default
IGMP configuration changed: Snooping enabled on VLAN %d
IGMP configuration changed: Snooping disabled on VLAN %d
IGMP configuration changed: Proxy enabled on VLAN %d
IGMP configuration changed: Proxy disabled on VLAN %d
IGMP configuration changed: Query time set to %d on VLAN %d
IGMP configuration changed: Robust value set to %d on VLAN
%d
IGMP configuration changed: Version %d router port mask
0x%x set on VLAN %d
IGMP configuration changed: Unknown multicast filter enabled
IGMP configuration changed: Unknown multicast filter enabled
IGMP configuration changed: Trunk %d created for IGMP
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitoring
NN47200-505 03.01 Standard
5.1 27 August 2007
24):
describes the IGMP syslog messages

Advertisement

Table of Contents
loading

This manual is also suitable for:

5530-24tfd55205510-24t5510-48t5520-24t-pwr5520-48t-pwr

Table of Contents