Deleting An Rmon Threshold Configuration; Viewing The Rmon Fault Event Log; Nortel Ethernet Routing Switch 5500 Series; Nn47200-505 03.01 Standard - Nortel 5510 Configuration

96 Chapter 3 Configuring Remote Network Monitoring (RMON)
The new RMON threshold is displayed in the RMON Threshold Table
section.
Deleting an RMON threshold configuration
To delete an existing RMON threshold configuration, follow this procedure:
Step
1
2
3

Viewing the RMON fault event log

RMON events and alarms work together to produce notification when
values in the network go out of a specified range. When values pass the
specified ranges, the alarm is triggered. The event specifies how the activity
is recorded.
An event specifies whether a trap, a log, or a trap and a log are generated
to view alarm activity. When RMON is globally enabled, two default events
are generated:
•
•
Default events specify that when an alarm goes out of range, the firing of
the alarm is tracked in both a trap and a log. For example, when an alarm
fires at the rising threshold, the rising event specifies that this information
be sent to both a trap and a log. The RMON Event Log screen works in
conjunction with the RMON Threshold screen to enable viewing the history
of RMON fault events.
To view a history of RMON fault events, follow this procedure:
Step
1
Copyright © 2005 - 2007, Nortel Networks
.
Action
Open the RMON Threshold screen by selecting Fault > RMON
Threshold from the menu. This screen is illustrated above.
In the RMON Threshold Table, click the Delete icon in the row of
the entry to be deleted.
A message prompts for confirmation of the request. Click Yes.
Rising Event
Falling Event
Action
Open the RMON Event Log screen by selecting Fault > RMON
Event Log from the menu. This screen is illustrated below.

Nortel Ethernet Routing Switch 5500 Series

Configuration - System Monitoring

NN47200-505 03.01 Standard

5.1 27 August 2007
—End—