Nortel Ethernet Routing Switch 5500 Series; Nn47200-505 03.01 Standard - Nortel 5510 Configuration

112 Chapter 3 Configuring Remote Network Monitoring (RMON)
Field
Index
Threshold
Type
Value
Event Index
Deleting an alarm
To delete an alarm:
Step
1
2
3
The following table describes the fields on the Alarms tab.
Copyright © 2005 - 2007, Nortel Networks
.
Description
Uniquely identifies an entry in the alarm table. Each such entry
defines a diagnostic sample at a particular interval for an object
on the device.
Rising Value
When the current sampled
value is greater than or equal
to this threshold, and the value
at the last sampling interval
was less than this threshold,
generates a single event.
Index of the event entry that is
used when a rising threshold
is crossed. The event entry
identified by a particular value
of this index is the same as
identified by the same value
of the event index object.
(Generally, accept the default
that is already filled in.)
Action
Open the Alarms screen by selecting Serviceability > RMON >
Alarms from the menu. This screen is illustrated below.
RmonAlarms screen - Alarms tab
Select the alarm to be deleted.
Click Delete.

Nortel Ethernet Routing Switch 5500 Series

Configuration - System Monitoring

NN47200-505 03.01 Standard

5.1 27 August 2007
Falling Value
When the current sampled
value is less than or equal to
this threshold, and the value at
the last sampling interval was
greater than this threshold,
generates a single event.
Index of the event entry that is
used when a falling threshold
is crossed. The event entry
identified by a particular value
of this index is the same as
identified by the same value
of the event index object.
(Generally, accept the default
that is already filled in.)
—End—