Ddc Calibration - BMW S 1000 RR 2021 Rider's Manual

120 ADJUSTMENT
Loosen clamping screws 1.
To increase the riding height,
turn the adjusting screw 2 in
the direction A.
To reduce the riding height,
turn the adjusting screw 2 in
the direction B.
Tighten clamping screws 1.
Clamping bolt at adjust-
ing strut
M6 x 25
8 Nm
Remove the engine lifter.
with Dynamic Damping Con-
trol (DDC) OE
Calibrating DDC (

DDC CALIBRATION

with Dynamic Damping Con-
trol (DDC) OE
Calibrating DDC
Place the motorcycle on the
side stand or on a suitable
auxiliary stand. Do not sit
on the motorcycle during
calibration. Remove items of
luggage.
Navigate to
Vehicle settings
calibration
Select
with
Calibration is performed.
If calibration has been
performed successfully,
Calibration was suc-
cessful.
Calibration failed!
Park the fully unloaded
vehicle on its side
stand.
120).
calibration must be repeated.
Select
If calibration is not successful
after several attempts, contact
a specialist workshop, prefer-
ably a BMW Motorrad Partner.
Settings
.
1 and confirm
Start
2.
OK
is displayed. If
is displayed, the
.
Repeat
,
,
DDC