NaviLink 2D/3D
Procedure
Preparation
✧
Set up the C-arm and the navigation sys-
tem and start both systems.
✧
Enter the patient data.
✧
Establish direct communication with the
aid of a network cable.
➭
The readiness of the C-arm is indicated
by an icon in the status bar of the
Examination task card (1).
✧
Select the examination parameters.
Procedure
✧
Release radiation.
The image appears in the References
➭
task card at the monitor trolley.
✧
Check the setting and image quality.
If necessary, repeat the exposure.
✧
Confirm the selection of the image at the
navigation system by clicking Request
image.
➭
The image is automatically transferred
from the C-arm to the navigation system.
✧
Make further exposures until you have
reached the desired number of images for
navigation.
Final steps
✧
If necessary, dismantle the C-arm and
take it out of the room.
127